×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerConventional Refrigeration Systems (VCRS) are the most commonly used in industrial buildings and facilities. Conventional refrigeration systems are among the most energy-consuming sources in addition to causing more environmental problems and gas emissions, such as hydrocarbons (HCs) and hydrochlorofluorocarbons (HCFCs), are known to contribute to global warming and ozone depletion. Absorption Refrigeration Systems (VARS) are a good alternative to conventional refrigeration systems because they use low-grade heat sources and operate with environmentally friendly liquids. The most important of these heat sources is the heat wasted from engines, industrial processes and many other sources. The global objective of the study is a literature review on the different ways to operate the absorption refrigeration system using waste heat in engines that include exhaust gases and engine cooling water as well as renewable energy that includes solar energy. Reviews of the literature have demonstrated how the absorption refrigeration system can be used and operated using a variety of thermal sources. This study also supports the usage of ecologically friendly chillers to provide air conditioning and refrigeration, as it shows these systems have a lower performance coefficient when compared to conventional refrigeration systems.
This paper presents an extensive review of energy harvesting from the column vibrations of wind turbines under the influence of wind. The study investigates the underlying theories, mechanisms, and potential applications of such a system. By tapping into the vibrational energy otherwise dissipated in wind turbines, the study proposes an innovative approach to enhance renewable energy generation. Furthermore, the potential benefits of the technology, such as powering remote sensors, vibration damping, structural health monitoring, and increasing wind turbine efficiency and lifespan, are discussed. While the study acknowledges the promise of such an approach, it also emphasizes the need for further research to optimize and integrate these systems effectively into the renewable energy landscape.
Solar energy is the most suitable among all renewable energy options for competing with fossil fuels in desalination due to its ability to utilize both heat and power for the process. In this study, the Parabolic Trough Solar Collector (PTSC) for powering a Single Stage Flash (SSF) desalination unit was proposed for Basrah city climate, Iraq. The desalination system comprises two directly coupled sub-systems: the PTSC and the SSF desalination unit. The preheated feed brine water coming from condenser was used as a Heat Transfer Fluid (HTF) for PTSC, which gets heated to a desired temperature referred to as the Top Brine Temperature (TBT). The numerical simulations were performed via EBSILON professional 16.02 (2022) software. The effects of TBT, mass flowrate of feed brine water to get the desired TBT, solar collector area, and vacuum pressure inside flash chamber on the performance of the desalination system was studied. A major finding of the current study can be summarized as follows: The collector efficiency is enhanced eventually as TBT increases. The maximum values of distillate water in June are around 5.5, 4.56, 3.69, 2.75 and 1.85 kg/h for 12.408, 10.434, 8.3472, 6.26, and 4.1736 m² collector area respectively, when TBT 107 °C and vacuum pressure 40 kPa. For 1.598 m² collector area, the total distillate in the 1st of June amounted to 7.9 kg, with an average production rate of around 0.7 kg/h. The solar SSF system's productivity per solar collector unit area at 20 kPa, 15 kPa, and 10 kPa vacuum pressures was 4.7 kg/day/m², 5.3 kg/day/m², and 6.25 kg/day/m², respectively. The average Performance Ratio (PR) values are determined to be 0.694, 0.577, and 0.491 for 10 kPa, 15 kPa, and 20 kPa, respectively. These results are very acceptable when compared with an existing literature.
The solar chimney power plant is one of the modern models studied on the world. This study presents an engineering and numerical analysis of solar chimney with different parameters. Also, it studies the comparison of two collector base shapes(circular and hexagonal) depend on the five storage material types and their effects on the heat transfer, velocity, efficiency, etc. inside the solar chimney system by considering the solar array intensity equations and the energy equation to calculate the heat transferred and stored by applying the laws of CFD. The finite volume method is used to analyze the geometry physical model by applying a commercial Fluent 6.3 code with Gambit 2.3. The obtained results show that the efficiency of solar chimney is increased by increasing the area of solar glassed collector with circular base shape than the others of polygonal or rectangular one because the circular was covered large area of system. So, the circular ground collector shape for thermal storage is the favour because it is the better to increase the velocity of entering air and to increase the efficiency of turbine. In addition to that the black Pebble storage plate is the better material for heat storage which is convected to air passed for operation of turbine than the other types aluminum, tar, copper and steel seriously.
Modern life makes energy, and the source of it is very important. This renewable energy comes from the Earth-Air Heat Exchanger (EAHE) in the soil employed as an air conditioning device for buildings in the climate conditions in Basrah city, south of Iraq. In the present study, the EAHE buried in the soil is simulated numerically using the finite volume method with a soft package. ANSYS: Fluent 2021/R2. A parametric analysis was carried out to determine the effect of three depths ( Z = 1, 2, and 3 m), taking into account the physical properties of the soil in the area under study, which is in the city of Basrah in southern Iraq, at longitude 47.749° and latitude 30.568°, as well as the data and time of 1/6/2023 at 12 p.m., the diameter of the pipe ( D = 7.62, 10.16, and 15.24 cm), and different velocities ( v = 0.5, 1, and 1.5 m/s). The results are presented as a temperature contour and a velocity contour for the performance of EAHE. The important results showed that when the depth of the buried pipe decreases, the temperature of the air outlet and heat exchanger increases; when the diameter decreases, the air outlet temperature from the EAHE and the soil temperature decrease; when the length of the pipe is about 30 m, after this length, the decrease in temperature is very small; and the maximum temperature difference of about 10 °C between the ambient temperature and the outlet temperature of the EAHE was obtained at a depth of 3 m and a velocity of 1 m/s at a diameter of 7.62 cm.