×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerThis study numerically investigates natural convection of Cu-water nanofluid in a square cavity subjected to a cooling air stream along the left wall, with the right and bottom walls maintained at cold (TC) and hot (TH) temperatures, respectively, while the top wall is adiabatic. The nanofluid flow is assumed laminar and governed by the Boussinesq approximation. The governing equations are solved using the finite volume method in ANSYS FLUENT. Simulations are performed for nanofluid volume fractions (φ = 0–0.16), Rayleigh numbers (Ra = 10³–10⁵), and free stream Reynolds numbers (Re∞ = 10³–10⁴). The effects of these parameters on stream function (ψ), temperature contours (θ), and average Nusselt number (Nuavg) are analyzed. Results indicate that heat transfer rates increase with higher φ, Ra, and Re∞. Increasing φ and Ra enhances circulation within the cavity, whereas higher Re∞ induces secondary vortices and reduces circulation in the primary vortex. Comparisons of local Nusselt numbers and temperature distributions with previous studies show good agreement, with maximum errors of 14.28% and 3.2%, respectively.
The conjugate natural convection-conduction heat transfer in a domain composed of nanofluids filled porous cavity heated by a vertical solid wall is studied under steady-state conditions. The vertical left wall of the solid is kept isothermal at hot temperature Th. The vertical right wall of the solid is in contact with the nanofluid saturated porous medium contained in the cavity. The right vertical wall of the cavity is kept isothermally at the lower temperature Tc. The upper and lower horizontal walls are kept adiabatic. The governing equations of the heat transfer in the solid wall and heat and nanofluid flow, based on the Darcy model, in the nanofluid-saturated porous medium together with the derived relation of the interface temperature are solved numerically using the over-successive relaxation finite- difference method. A temperature independent nanofluids properties model is adopted. The investigated parameters are the nanoparticles volume fraction (0-0.2), Rayleigh number Ra (10-1000), solid wall to base-fluid saturated porous medium thermal conductivity ratio kwf (0.1, 1, 10), and the solid wall thickness D (0.05-0.5). The results are presented in the conventional form; contours of streamlines and isotherms and the average Nusselt number. At a very low Rayleigh number Ra=10, an enhancement in heat transfer within the porous cavity with is observed. Otherwise, the heat transfer may be unchanged or deteriorated with depending on the wall thickness D and the conductivity ratio kwf.
Natural convection heat transfer in porous cavity with arc shape wall filled with nanofluid is studied numerically. The right arc shape wall of the cavity is heated at constant temperature (Th) while the left wall is kept cold at constant temperature (Tc), and the other horizontal walls are thermally insulated. The governing equations of the heat transfer and nanofluid flow are solved Flex PDE software. A temperature independent nanofluids properties models are adopted. The investigated parameters are the nanoparticles volume fraction Ø= (0-0.2), Rayleigh number Ra (10-1000) and arc center Ce (1-∞). The results are presented by contour of streamlines, isotherms and the average Nusselt number. The results have showed that the average Nusselt number decreases with increasing Ce and increases with increasing Ra and Ø.
In this work, the turbulent buoyancy driven fluid flow and heat transfer in a differentially heated tall rectangular enclosure filled with nanofluid is quantified numerically. The two dimensional governing differential equations (continuity, momentum, energy and low Reynolds number LRN k-ω turbulence equations) are discretized using the finite volume method. SIMPLE algorithm is employed to obtain stabilized solution for high Rayleigh numbers. Two types of nanofluids namely, Al2O3-water and Cu-water, were considered. The effect of Rayleigh number (1010 to 1012), diameter of nanoparticles in the range 25-100 nm, nanoparticle volume fraction in range 0-0.08 and the aspect ratio (30, 40 and 50) on fluid flow and heat transfer are investigated. The present results are compared with previously published work and a qualitative agreement with good validation is obtained. Results show that addition of nanoparticles makes the liquid be more viscous which decreases the vertical velocity component and also decreases the temperature gradient near the walls. Also an announced heat transfer enhancement is obtained with nanoparticle volume fraction reaching a maximum point called optimal volume loading, at which the maximum convective heat transfer is obtained, and then it decreased with further increase of volume fraction.