Cover
Vol. 18 No. 2 (2018)

Published: September 30, 2018

Pages: 15-25

Original Article

Numerical Simulation of Natural Convection in a Square Cavity Utilizing Nanofluid and Subjected to Air Stream Cooling

Khalid B. Saleem 1
1 Mech. Eng. Department Engineering College University of Basrah
History
  • Received: June 30, 2018
  • Available Online: September 30, 2018
DOI

https://doi.org/10.33971/bjes.18.2.2

Abstract

This study numerically investigates natural convection of Cu-water nanofluid in a square cavity subjected to a cooling air stream along the left wall, with the right and bottom walls maintained at cold (TC) and hot (TH) temperatures, respectively, while the top wall is adiabatic. The nanofluid flow is assumed laminar and governed by the Boussinesq approximation. The governing equations are solved using the finite volume method in ANSYS FLUENT. Simulations are performed for nanofluid volume fractions (φ = 0–0.16), Rayleigh numbers (Ra = 10³–10⁵), and free stream Reynolds numbers (Re∞ = 10³–10⁴). The effects of these parameters on stream function (ψ), temperature contours (θ), and average Nusselt number (Nuavg) are analyzed. Results indicate that heat transfer rates increase with higher φ, Ra, and Re∞. Increasing φ and Ra enhances circulation within the cavity, whereas higher Re∞ induces secondary vortices and reduces circulation in the primary vortex. Comparisons of local Nusselt numbers and temperature distributions with previous studies show good agreement, with maximum errors of 14.28% and 3.2%, respectively.

Keywords

References

  1. Alizadeh, M. R. and Dehghan, A.A., “Conjugate natural convection of nanofluids in an enclosure with a volumetric heat source”. Arab J. Sci. Eng., 39, 1195–1207, 2014.
  2. Faroogh, G., Leila, J., Mohammad, M. R., Arash, B., and Mohammed, E. A., “Numerical simulation of natural convection of the nanofluid in heat exchangers using a Buongiorno model”. App. Math. and Comp., 254, 183-203, 2015.
  3. Leong, K. Y., Saidur, R., Kazi, S. N., and Mamun, A. H., “Performance investigation of an automotive car radiator operated with nanofluid-based coolants (nanofluid as a coolant in a radiator)”. J. Applied Thermal Engineering, 30, 2685-2692, 2010.
  4. Min, Z., Ruixiang, W., and Jiangfeng, L., “Actuality and application foreground of nanofluids in refrigeration system”. Materials Science Forum, 694, 261-265, 2011.
  5. Xing, L., Ying, C., Songping, M., Lisi, J., and Xuefeng, S., “Effect of surface modification on the stability and thermal conductivity of water-based $text{SiO}_2$-coated graphene nanofluid”. Thermochimica Acta, 595, 6-10, 2014.
  6. Manab, K.D., and Pravin, S.O., “Natural convection heat transfer augmentation in a partially heated and partially cooled square cavity utilizing nanofluids”. Int. J. Numerical Methods for Heat and Fluid Flow, 19, 411-431, 2009.
  7. Jahanshahi, M., Hosseinizadeh, S.F., Alipanah, M., Dehghani, A., and Vakilinejad, G.R., “Numerical simulation of free convection based on experimental measured conductivity in a square cavity using Water/SiO2 nanofluid”. Int. Commun. Heat and Mass Transf., 37, 687–694, 2010.
  8. Sheikhzadeh, G. A., Arefmanesh, A., Kheirkhah, M. H, and Abdollahi, R., “Natural convection of $text{Cu}–text{water}$ nanofluid in a cavity with partially active side walls”. Euro. J. of Mech. B/Fluids, 30, 166-176, 2011.
  9. Abbasian, A.A., Mazrouei, S., Mahmoodi, M., Ardeshiri, A., and Aliakbari, M., “Numerical study of mixed convection flow in a lid-driven cavity with sinusoidal heating on sidewalls using nanofluid”. Superlattices and Microstructures, 51, 893-911, 2012.
  10. Rahmati, A.R., Sina, N., and Mehrdad, N. B., “Natural convection flow simulation of nanofluid in a square cavity using an incompressible generalized lattice boltzmann method”. Defect and Diffusion Forum, 329, 69-79, 2012.
  11. Salva, P., and Chamkha, A.J., “An analysis on free convection flow, heat transfer and entropy generation in an odd-shaped cavity filled with nanofluid”. Int. Commun. Heat and Mass Transf., 54, 8-17, 2014.
  12. Said, B., M’barek, F., and Hossine, E., “Natural Convection in a Square Cavity Containing a Nanofluid and a Partially-heated Square Block at the Centre”. American J. of Heat and Mass Transf., 4, 40-52, 2017.
  13. Brinkman, H.C., “The Viscosity of Concentrated Suspensions and Solutions”. J. of Chemical Physics, 20, 571-581, 1952.
  14. Eastman, J.A., Choi, S.U.S., Yu Li, S., Yu W., and Thompson, L.J., “Anomalously increased effective thermal conductivity of ethylene glycol-based nanofluids containing copper nanoparticles”. Appl. Phys. Lett. , 78, 718–720, 2001.
  15. Jang, S.P., Seok, P., and Choi, S.U.S., “The role of Brownian motion in the enhanced thermal conductivity of nanofluids”. Appl. Phys. Lett., 84, 4316–4318, 2004.
  16. Khanafer, K., Kambiz, V., and Marilyn, L., “Buoyancydriven heat transfer enhancement in a two-dimensional enclosure utilizing nanofluids”. Int. J. Heat Mass Transf., 46, 3639–3653, 2003.
  17. Theodore, L.B., Adrienne, S.L., Frank, P.I., and David, P. D., “Fundamentals of heat and mass transfer”, seventh ed., John Wiley & Sons Inc, 2011.
  18. Ibtissam, E., and Rachid, S., “Numerical Study of Natural Convection in a Two-Dimensional Enclosure with a Sinusoidal Boundary Thermal Condition Utilizing Nanofluid”. Engineering, 4, 445-452, 2012.
  19. Patankar, S.V., “Numerical Heat Transfer and Fluid Flow”. First ed., Hemisphere, 1980.
  20. Sathiyamoorthy, M., Tanmay, B., Roy, S., and Pop, I., “Steady natural convection flows in a square cavity with linearly heated side wall(s)”. Int. J. Heat Mass Transf., 50, 766–775, 2007.