×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerSolar desalination uses solar radiation to convert saline or seawater into clean water and is increasingly crucial due to growing pollution from industrial and automotive sources. Although solar stills offer a sustainable solution, they face challenges in terms of production efficiency. This study presents a new structural design for solar stills, which incorporates advanced insulation materials, a well-designed distillate channel, and an inclined base to enhance productivity. The research explores how different climatic conditions such as wind speed, solar radiation, and atmospheric humidity affect solar still performance. Seven experimental setups were evaluated, comparing traditional inclined stills with advanced closed-loop systems. The results demonstrated that closed-loop systems improved productivity by 28.6% compared to open-loop systems. Additionally, moderate wind speeds increased productivity by 20.82%, while partial cloud cover and light rain decreased productivity by 52.15% and 12.9%, respectively. However, light rain also enhanced condensation efficiency by cooling the glass surface. This study highlights the importance of incorporating environmental factors into the design and optimization of solar still systems for improved performance.
In this paper, a theoretical study of the conventional solar-still system integrated via the design of heat recovery of air exhausted from the air conditioner condenser employing heat exchangers (WHRUs) was conducted. This study aims to improve desalination performance by compensating for the non-existence of sunlight during the night. A comparison was made between the desalination performance in the event of exposure to solar radiation and its performance in the case of exposure to the system (WHRUs). It was found that the (WHRUs) system has a minimal impact on the production of the conventional desalination rig during the night period, as the highest cumulative productivity in the presence of the (WHRU S ) reached (2.15 kg) in August. In contrast, the productivity dependent on solar radiation was (4.58 kg) for the same month, with the most significant percentage of improvement reaching (31.91 %).
Performance a double slope of the solar still Integrated With or without parabolic trough collector is investigated experimentally. To improve the output of a double slope solar still, a number of initiatives have been undertaken, using wax as a phase change material (PCM) with a parabolic trough collector. A parabolic trough collector (PTC) transfers incident solar energy to the solar still through a water tube connected to a heat exchanger embedded in used microcrystalline wax. Experiments were carried out after orienting the basin to the south and holding the water depth in the basin at 20 mm. According to the results obtained, the solar stills with parabolic trough collector have higher temperatures and productivity than solar stills without parabolic trough collector, as well as the ability to store latent heat energy in solar still, allowing fresh water to condense even after sunset. In addition, the parabolic trough collector with phase change material in the double slope solar improves productivity by 37.3 % and 42 %, respectively.
This study presents solar chimney power plant integrated with sea water desalination system. A simple mathematical model is based on the conservation of mass and energy. The results show that the integrated system of solar chimney power plant and solar still can achieve simultaneously. The analysis is performed for both summer and winter at latitude 30 o N. It’s noted that, the water layer thickness is of a significant effect on the fresh water productivity while the dimensions of solar chimney and the solar collector are of a minor effect. The productivity of fresh water and output power for summer are the highest. The present work is compared with experimental data of the other work and showed a good agreement.