×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerSolar desalination uses solar radiation to convert saline or seawater into clean water and is increasingly crucial due to growing pollution from industrial and automotive sources. Although solar stills offer a sustainable solution, they face challenges in terms of production efficiency. This study presents a new structural design for solar stills, which incorporates advanced insulation materials, a well-designed distillate channel, and an inclined base to enhance productivity. The research explores how different climatic conditions such as wind speed, solar radiation, and atmospheric humidity affect solar still performance. Seven experimental setups were evaluated, comparing traditional inclined stills with advanced closed-loop systems. The results demonstrated that closed-loop systems improved productivity by 28.6% compared to open-loop systems. Additionally, moderate wind speeds increased productivity by 20.82%, while partial cloud cover and light rain decreased productivity by 52.15% and 12.9%, respectively. However, light rain also enhanced condensation efficiency by cooling the glass surface. This study highlights the importance of incorporating environmental factors into the design and optimization of solar still systems for improved performance.
Solar power systems, also known as photovoltaic (PV) systems, are widely used as a clean and sustainable energy source worldwide. However, these systems can be affected by various factors that contribute to dust accumulation, which have been grouped into five categories: module characteristics, environmental factors, climatic conditions, exposure situations, and soiling properties. Dust accumulation can significantly impact photovoltaic modules' efficiency and power output, leading to a decrease in electricity generation. Airborne dust reduces the intensity of solar radiation by scattering and absorbing it, especially in hot and dry regions such as southern Iraq. This study provides an updated overview of the process of dust accumulation on photovoltaic modules south of Iraq. Moreover, it illustrates the methods used to measure dust accumulation and the performance of solar PV under soiling. Furthermore, it exemplifies the sources of the soiling generation. Additionally, it demonstrates the composition and size of dust particles. Finally, future research perspectives are discussed, and a thorough investigation of the impact of dust is suggested in all regions of Iraq and even in all countries of the world, especially those interested in clean energy. This research aims to understand the effect of dust soiling on PV performance. The outcome of this research will help design the PV module system while considering the most effective method to reduce or prevent dust accumulation in specific areas.
In this proposed study, all environmental factors affecting the aboveground and buried pipes, such as solar radiation and temperature, and soil temperature, have been studied on the characteristics of flow inside the aboveground and underground pipelines by building a mathematical model using MATLAB based on energy balance equations. From the mathematical model, the effect of solar radiation on the aboveground section of the pipeline is significate. During March and an inlet temperature of 34 °C, the pipeline outlet fluid temperature will rise to 50 °C. Other parameters affecting the aboveground section of the pipeline, such as ambient temperature and wind speed, have a much smaller effect on the fluid temperature, and the temperature difference is approximately 4 °C between the highest and lowest pipeline outlet fluid temperature. The result for the underground section of the pipeline showed that the main affecting parameter on the fluid temperature is the burry depth of the pipeline, the deeper the pipeline depth the lower the temperature variation and the lower fluid temperature can be seen, at 1 meter of bury depth the minimum and maximum fluid temperature was 18 °C and 36 °C respectively, and at 5 meters of bury depth, the minimum and maximum fluid temperature was 26 °C and 31 °C respectively. This study also checks different process parameters. Some of these are fluid flow, pipe diameter, and pipe material. The effect of the fluid flow and pipe diameter has a similar impact on the fluid temperature (while fixing all the other parameters), the higher the fluid flow or the smaller the pipe diameter resulted in a better heat transfer and more considerable temperature difference, and vice versa. The final process parameter, pipe material, had little to no effect on the fluid temperature variation.
The desalination market is gradually growing as a result of the significant water scarcity in various regions throughout the world. Concentrated solar power (CSP) can be used to power distillation, which is an effective method for addressing water shortages in areas where there is both a severe lack of water and abundant direct normal irradiation. CSPs are ideal candidates for the advancement of desalination technologies due to their capacity to produce both thermal and electricity energy. This review article offers a comprehensive of the current status of cutting-edge CSP-desalination systems. The paper reviews previously published studies conducted by researchers in the field of multi-effect desalination using concentrated solar collectors, and they are classified into two main types. Exclusively freshwater generation and freshwater / electricity cogeneration. In addition, the paper reviews conventional desalination. This review illustrates that there are numerous prospective methods for integrating desalination systems into CSPs. Potential areas for future investigation in CSP-desalination systems. In particular, the most significant obstacles to be surmounted are lowering the costs and efficiency improvements of solar repayment and desalination equipment. A potential method to expedite the commercialization of these plants is to develop innovative strategies that optimize thermal efficiency and reduce costs. Environmental factors (solar radiation intensity, ambient temperature and wind speed) and design factors (solar field area, number of mirrors, number of stages, steam temperature, steam quantity and pressure) are the main effective parameters that affect the distilled water production process. In general, the CSP desalination systems are environmentally and technically appealing; however, there remains substantial progress to be made in order for these plants to be commercially viable.