×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerNew composite reinforced concrete beams, in which reinforced concrete component is connected to steel T-section, are proposed. The stirrups of the beam were utilized as shear connectors by passing them through drilled holes in the web of the steel T-section. Experimental test and numerical analysis were conducted to determine the behaviour of such beams when subjected to combined shear, torsion, and bending stresses. Full scale one conventional reinforced concrete curved in plan beam C1, and four composite reinforced concrete ones, C2 to C5, were tested. The degree of shear connection between the two components of beams C2 to C5 was changed by varying the number of stirrups which are used as shear connectors. The increase in load carrying capacity of the composite reinforced concrete beams reached 55 % for beam C4 as compared to that of ordinary reinforced concrete beam. The experimental results demonstrated that the stirrups are very effective in providing the interaction between the two components of the beams. The degree of shear connection emerged not to have effect on the behaviour of tested beams. Three-dimensional finite element analysis was conducted using commercial software ABAQUS. To model the shear connection in composite reinforced concrete beam, the stirrups were connected to the web of the steel T-section by springs at the location of the stirrups. Good agreement is obtained between the results of the experimental tests and the finite element analysis.
This numerical study was conducted to simulate and analyze the pushout test for the new shear connector in a new steel-concrete composite system. In this system, the shear stirrups of the reinforced concrete beam are used as shear connectors when passed through holes drilled in the web of inverted steel T-section. The numerical analysis was performed by creating a three-dimensional finite element model using the finite element program ANSYS 21 student version to simulate the behavior of the new innovative shear connectors. The pushout specimens analyzed in this study have been tested experimentally by the same researchers earlier. A total of fifty-six push-out specimens were modeled and analyzed to investigate the effect of many parameters on the shear strength and slip capacity of the shear connector. The parameters studied in this investigation were the specimen dimensions (length and width), the diameter of stirrups (shear connector), the number of connectors per specimen, concrete strength, size of T-section, and shape of the specimen. The finite element analysis using ANSYS gave a good prediction of the effect of studied parameters on connector strength, the failure modes, the form and intensity of deformations in the model, and the load-slip response. The maximum difference in connector strength which was observed between the numerical and experimental results was 15 %.