×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerThe solar chimney is a natural draft device that uses solar radiation to provide upward momentum to the in-flowing air, thereby converting the thermal energy into kinetic energy through an air turbine which in turn can be converted into electrical energy. The main parts of the solar chimney power plant are a large circular solar collector, a tall chimney, and an air turbine. In this paper, a theoretical study was performed to evaluate the performance of a solar chimney power plant system in Basrah City, where sunny days and solar radiation are high. A mathematical model was developed to study the effect of various parameters on the output power of the solar chimney. I1 was found that the output power depends strongly on the chimney tall and the difference between the collector air temperature and the ambient air temperature as well as the outside heat transfer coefficient, which essentially depends on the wind speed.
The solar chimney power plant is one of the modern models studied on the world. This study presents an engineering and numerical analysis of solar chimney with different parameters. Also, it studies the comparison of two collector base shapes(circular and hexagonal) depend on the five storage material types and their effects on the heat transfer, velocity, efficiency, etc. inside the solar chimney system by considering the solar array intensity equations and the energy equation to calculate the heat transferred and stored by applying the laws of CFD. The finite volume method is used to analyze the geometry physical model by applying a commercial Fluent 6.3 code with Gambit 2.3. The obtained results show that the efficiency of solar chimney is increased by increasing the area of solar glassed collector with circular base shape than the others of polygonal or rectangular one because the circular was covered large area of system. So, the circular ground collector shape for thermal storage is the favour because it is the better to increase the velocity of entering air and to increase the efficiency of turbine. In addition to that the black Pebble storage plate is the better material for heat storage which is convected to air passed for operation of turbine than the other types aluminum, tar, copper and steel seriously.
This study presents solar chimney power plant integrated with sea water desalination system. A simple mathematical model is based on the conservation of mass and energy. The results show that the integrated system of solar chimney power plant and solar still can achieve simultaneously. The analysis is performed for both summer and winter at latitude 30 o N. It’s noted that, the water layer thickness is of a significant effect on the fresh water productivity while the dimensions of solar chimney and the solar collector are of a minor effect. The productivity of fresh water and output power for summer are the highest. The present work is compared with experimental data of the other work and showed a good agreement.
Solar chimney (SC) together with earth to air heat exchanger (EAHE) is being employed as a low-energy consuming technique to remove undesirable interior heat from a building in the hot seasons. A numerical program "FLUENT 6.3 code" of an earth to air heat exchanger (EAHE) is studied for predicting the outlet air temperature and cooling potential of these devices in Basrah climate. Theoretical analyses have been conducted in order to investigate the ventilation in a solar chimney. The investigation into the viability of Low Energy Earth Pipe Cooling Technology in providing thermal comfort in Basrah. The demand for air-conditioning in buildings in Basrah affects the country escalating energy consumption. Therefore, this investigation was intended to seek for an alternative passive cooling to air-conditioning. The passive technology, where the ground was used as a heat sink to produce cooler air, has not been investigated systematically in hot and humid countries. A sub-soil temperature model adapted for the specific conditions in Basrah is presented and its output compared with CFD modeling. The results have shown that the potential of Earth Pipe is providing lower output temperature of air inlet to the room. We found that the resulting temperature at the buried pipe outlet decreases with increasing pipe length, decreasing pipe diameter, decreasing mass flow rate of flowing air in the pipe and increasing depths up to 4m.
The prediction of the concentration fields of pollutants released to the atmosphere is a key factor in assessing possible environmental damages caused by industrial emissions. To solve the concentration equation for gaseous or particulate effluents it is necessary to know as accurately as possible the velocity field and turbulence intensities at the atmospheric boundary layer in the region of interest. A two dimensional mathematical model based on the equations of fluid mechanics along with a modified non- isotropic k-ε turbulence model are employed to calculate the flow and dispersion at the atmospheric micro scale (distances of the order of kilometers). Results of investigation are obtained by using the finite volume method (FVM) to solve the average Navier Stock equations coupling with turbulent k- ε model. The calculation was carried out for plume flow from the industrial chimney with different plume velocities, wind velocities and heights of stack. The equations of model are solved with SIMPLE schemes. FLUENT program used to show the results of the plume flow at the variable parameters of wind and plume velocities and heights of stack, the code is applied to simulate several cases of flow and dispersion. Comparisons against experimental results show that the non-isotropic turbulence model has better ability to foresee the plume dispersion than the standard k- ε, in which the non-isotropic character of turbulence is relevant. The computational results show that the plume path and concentrations are correctly predicted by the numerical model.
In the present research, a Matlab program with a graphical user interface (GUI) has been established for studying the performance of a solar tower power plant (STPP). The program gives the ability for predicting the performance of STPP for different tower dimensions, ambient operating conditions and locations. The program is based on the solution of a mathematical model derived from the heat and mass balance for the tower components. The GUI program inputs are; tower dimensions, solar radiation, ambient temperature, pressure, wind velocity, turbine efficiency, emissivity and absorptivity for collector and ground and thermal conductivity and thickness for ground. However, the GUI program outputs are; temperature and pressure differences across the collector and tower, velocity in the tower, density of air in collector outlet, mass flowrate of air, efficiency for collector and tower, the overall efficiency and output power of STPP. The effect of the geometrical dimensions of STPP and some climatic variables on the plant performance was also studied. The results show that the output power increases with increasing the collector diameter, chimney diameter and solar radiation by an increasing of 0.282 kW/m, 0.204 kW/m and 0.046 kW/(W/m2) respectively.