×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerThis study investigates the deep drawing process of carbon fiber-reinforced high-density polyethylene (CF-HDPE) composites through experimental and numerical approaches. The experimental part involved fabricating CF-HDPE sheets and conducting deep drawing operations under controlled parameters (punch speed, temperature, and forming depth) to evaluate material behavior and mechanical properties. Numerically, finite element analysis (FEA) using ABAQUS simulated the forming process, analyzing stress distribution, strain development, and material deformation under varying conditions. Results revealed that increasing forming depth and decreasing forming temperature elevated the required forming force. Comparisons between experimental and numerical outcomes showed consistent trends, though some differences arose due to factors like friction and material nonlinearity. The findings contribute to optimizing deep drawing processes for composite materials, enhancing manufacturing precision, and minimizing material defects.
This study focuses on the design and construction of an automated device for evaluating the scratch resistance of polymeric materials by measuring the force required to produce surface scratches and calculating the corresponding friction coefficient from device input–output data. The device was fabricated using locally available materials, with several components manufactured in local mechanical workshops. It comprises four main subsystems: mechanical components, scratching mechanism, electrical and electronic units, and an operating control program. The developed device offers the following specifications: normal load range of 0.1–325 N, sliding speed of 1–35 mm/s, tangential force measurement capacity of 0.1–294 N via a load cell, sample dimensions of 10–195 mm in length, 10–125 mm in width, and 0.25–50 mm in thickness, a maximum scratch length of 195 mm, and an adjustable indenter height ranging from 0.25 to 50 mm above the platform surface. Scratch testing and friction coefficient measurements were conducted on pure PMMA and PMMA reinforced with silicon dioxide (SiO₂) nanoparticles. Experimental results demonstrated increased scratch resistance and reduced friction coefficients with higher SiO₂ weight ratios. Additionally, the performance evaluation confirmed that the designed device is capable of accurately and rapidly measuring the tangential forces associated with scratching through a simple operational procedure.