×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerThis study investigates the deep drawing process of carbon fiber-reinforced high-density polyethylene (CF-HDPE) composites through experimental and numerical approaches. The experimental part involved fabricating CF-HDPE sheets and conducting deep drawing operations under controlled parameters (punch speed, temperature, and forming depth) to evaluate material behavior and mechanical properties. Numerically, finite element analysis (FEA) using ABAQUS simulated the forming process, analyzing stress distribution, strain development, and material deformation under varying conditions. Results revealed that increasing forming depth and decreasing forming temperature elevated the required forming force. Comparisons between experimental and numerical outcomes showed consistent trends, though some differences arose due to factors like friction and material nonlinearity. The findings contribute to optimizing deep drawing processes for composite materials, enhancing manufacturing precision, and minimizing material defects.
The present research aims to predict the thickness distribution of a wall of a deep drawn cup. A simplified 3D axisymmetric model which represents the deep drawing set (blank and tools) was created using a CAD software, and then imported into a finite element code ANSYS where a simulation was carried out. The model represents a cylindrical cup made of low carbon steel sheet. The results showed that the FE model represents real deep drawing process fairly well. The cup thickness distribution values showed a good agreement with the referenced values, where the failure or success of drawing process could be predicted based on the obtained thickness results. It was observed that a high value of friction restrains material movement and resulted in producing more thinning and more punch force. High blank holder force was found to decrease the thickness of both the bottom face of the cup and the flange rim. While increasing die corner radius increases thickness and the maximum thinning occurred at the smallest die corner radius. It was found by decreasing the punch profile radius the thickness at the flat bottom of the cup and under the punch profile region were reduced.