Cover
Vol. 22 No. 1 (2022)

Published: April 30, 2022

Pages: 69-77

Original Article

Review on Buckling and Bending Analysis of Functionally Graded Beam with and without Crack

Raghad Azeez Neamah 1 Ameen Ahmed Nassar 2 Luay S. Alansari 1
1 Department of Mechanical Engineering, College of Engineering, University of Kufa, Najaf, Iraq
2 Department of Mechanical Engineering, College of Engineering, University of Basrah, Basrah, Iraq
History
  • Received: December 27, 2021
  • Revised: February 6, 2022
  • Accepted: February 20, 2022
  • Available Online: April 24, 2022
DOI

https://doi.org/10.33971/bjes.22.1.8

Abstract

The functionally graded beam is a wide field of research, which attracts great interest today in the field of engineering, science, and medicine society. This type of beam is made from functionally graded material that is characterized by several properties one of them is the high strength to weight ratio. In the current years, this beam has witnessed great developments in the mechanism of its composition and the materials used in its manufacture. This research provides an overview of the properties, types, advantages and challenges, and applications of the functionally graded materials. In addition, this paper review provides a summary of the analysis of bending and buckling that occurs on the functionally graded beam with and without crack effect from (2008-2021) year. Through this review, the following was noted: Firstly, a small number of researchers have worked experimentally, and the properties of a beam in most of the research are gradual towards thickness using the mixing rule. Secondly, the crack has a very severe effect on the behavior of both bending and buckling for the graded beam. This critical review can be considered a milestone in future analyzes of the graded beam and is also beneficial to designers and researchers working in this field.

Keywords

References

  1. C. V. S. Murali, and P. S. Raju, “A Review on Vibrational Analysis of a Functionally Graded Beams”, International Journal of Engineering Research & Technology, Vol. 3, Issue 10, pp. 985-989, 2014.
  2. N. J. Kanu, U. K. Vates, G. K. Singh and S. Chavan, “Fracture problems, vibration, buckling, and bending analyses of functionally graded materials: A state-of-theart review including smart FGMS”, Particulate Science and Technology, Vol. 37, Issue 5, pp. 1-26, 2019.
  3. J. W. Lim, K. E. Foo, M. I. N. Ma’arof, and J. Mathews, “A brief review of functionally graded materials”, MATEC Web of Conferences, Vol. 131, pp. 1-6, 2017.
  4. W. S. Ebhota and T. Jen, “Casting and applications of functionally graded metal matrix composite”, Advanced Casting Technologies, Vol. 59, 2018.
  5. V. Bhavar, P. Kattire, S. Thakare, S. Patil and R. Singh, “A review on functionally gradient materials (FGMs) and their applications”, IOP Conference Series: Materials Science and Engineering, Vol. 229, pp. 1-9, 2017.
  6. S. Jamian, “Application of functionally graded materials for severe plastic deformation and smart materials experimental study and finite element analysis”, Doctoral dissertation, Department of Engineering Physics, Electronics and Mechanics, Nagoya Institute of Technology, 2012. https://core.ac.uk/download/pdf/12007641.pdf
  7. B. Saleh, J. Jiang, R. Fathi, T. AL-hababi, Q. Xu, L. Wang, D. Song, and A. Ma, “30 Years of functionally graded materials: An overview of manufacturing methods, Applications and Future Challenges”, Composites Part B: Engineering, Vol. 201, 2020.
  8. P. K. Chauhan and I. A. Khan, “Review on Analysis of Functionally Graded Material Beam Type Structure”, International Journal of Advanced Mechanical Engineering, Vol. 4, No. 3, pp. 299-306, 2014. https://www.ripublication.com/ijame-spl/ijamev4n3spl_09.pdf
  9. M. Şimşek, “Static Analysis of a Functionally Graded Beam Under a Uniformly Distributed Load by Ritz Method”, International Journal of Engineering and Applied Sciences (IJEAS), Vol. 1, Issue 3, pp. 1-11, 2009. https://dergipark.org.tr/tr/download/article-file/217607
  10. M. Aydogdu, “A general nonlocal beam theory: Its application to nanobeam bending, buckling and vibration”, Physica E: Low-dimensional Systems and Nanostructures, Vol. 41, Issue 9, pp. 1651-1655, 2009.
  11. H. Thai and T. P. Vo, “Bending and free vibration of functionally graded beams using various higher-order shear deformation beam theories”, International Journal of Mechanical Sciences, Vol. 62, Issue 1, pp. 57-66, 2012.
  12. T. P. Vo, H. Thai, T. Nguyen, and F. Inam, “Static and vibration analysis of functionally graded beams using refined shear deformation theory”, Meccanica, Vol. 49, pp. 155-168, 2014. https://doi.org/10.1007/s11012-013-9780-1
  13. S. Tharaknath, M. Tech, S. Govindaraji, T. Anbu, G. Purushothaman, and C. Kannadhasan, “Analysis of FGM Beam under a Udl Load”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), Vol. 11, Issue 5, pp. 8386, 2014. https://doi.org/10.9790/1684-11558386
  14. M. Mohammadimehr and M. Mahmudian-Najafabadi, “Bending and Free Vibration Analysis of Nonlocal Functionally Graded Nanocomposite Timoshenko Beam Model Rreinforced by SWBNNT Based on Modified Coupled Stress Theory”, Journal of Nanostructures, Vol. 3, Issue 4, pp. 483-492, 2013.
  15. A. Tripathy, R. K. Panda, S. Das, and S. K. Sarangi, “Static Analysis of Smart Functionally Graded Beams”, Spvryan’s International Journal of Engineering Sciences & Technology, Vol. 2, Issue 4, pp. 1-6, 2015. http://spvryan.org/archive/Issue4Volume2/22.pdf
  16. A. Karamanli, “Analysis of Bending Deflections of Functionally Graded Beams by Using Different Beam Theories and Symmetric Smoothed Particle Hydrodynamics”, International Journal of Engineering Technologies, Vol. 2, Issue 3, pp. 105-117, 2016.
  17. W. M. Soliman, M. A. Elshafei, and M. A. Kamel, “Static analysis of isotropic, orthotropic and functionally graded material beams”, Journal of Multidisciplinary Engineering Science and Technology, Vol. 3, Issue 5, pp. 4668-4683, 2016. http://www.jmest.org/wp-content/uploads/JMESTN42351483.pdf
  18. A. A. Khan, M. N. Alam, N. Rahman, and M. Wajid, “Finite Element Modelling for Static and Free Vibration Response of Functionally Graded Beam”, Latin American Journal of Solids and Structures, Vol. 13, Issue 4, pp. 690714, 2016. https://doi.org/10.1590/1679-78252159
  19. S. M. Aldousari, “Bending analysis of different material distributions of functionally graded beam”, Applied Physics A, Vol. 123, pp. 1-9, 2017.
  20. O. Al-Hawamdeh, I. M. Abu-Alshaikh, and N. Al-Huniti, “Finite Element Coding of Functionally Graded Beams under Various Boundary and Loading Conditions”, Journal of Applied Research on Industrial Engineering, Vol. 4, No. 4, pp. 279-290, 2017.
  21. N. Fouda, T. El-midany, and A. M. Sadoun, “Bending, buckling and vibration of a functionally graded porous beam using finite elements”, Journal of Applied and Computational Mechanics, Vol. 3, Issue 4, pp. 274-282, 2017. https://doi.org/10.22055/JACM.2017.21924.1121
  22. H. Z. Zainy, L. S. Al-Ansari, A. M. H. Al-Hajjar, and M. M. S. Shareef, “Analytical and numerical approaches for calculating the static deflection of functionally graded beam under mechanical load”, International Journal of Engineering & Technology, Vol. 7, Issue 4, pp. 3889-3896, 2018.
  23. A. S. Sayyad, and Y. M. Ghugal, “Analytical solutions for bending, buckling, and vibration analyses of exponential functionally graded higher order beams”, Asian Journal of Civil Engineering, Vol. 19, pp. 607-623, 2018.
  24. Y. Xia, Sh. Li, and Z. Wan, “Bending Solutions of FGM Reddy-Bickford Beams in Terms of Those of the Homogenous Euler-Bernoulli Beams”, Acta Mechanica Solida Sinica, Vol. 32, No. 4, pp. 499-516, 2019.
  25. V. H. Nam, P. V. Vinh, N. V. Chinh, D. Van Thom, and T. T. Hong, “A New Beam Model for Simulation of the Mechanical Behaviour of Variable Thickness Functionally Graded Material Beams Based on Modified First Order Shear Deformation Theory”, Materials, Vol. 12, Issue 3, pp. 1-23, 2019. https://doi.org/10.3390/ma12030404
  26. R. A. Sayyad, V. R. Rathi, P. K. Kolase, “Bending Analysis of Functionally Graded Beam Curved in Elevation Using Higher Order Theory”, International Research Journal of Engineering and Technology (IRJET), Vol. 6, Issue 8, pp. 361-367, 2019. https://www.irjet.net/archives/V6/i8/IRJET-V6I862.pdf
  27. Y. Wang, K. Xie, T. Fu, and C. Shi, “Bending and Elastic Vibration of a Novel Functionally Graded Polymer Nano composite Beam Reinforced by Graphene Nanoplatelets”, Nanomaterials, Vol. 9, Issue 12, pp. 1-22, 2019.
  28. S. Zghal, D. Ataoui and F. Dammak, “Static bending analysis of beams made of functionally graded porous materials”, Mechanics Based Design of Structures and Machines an International Journal, Vol. 50, Issue 3, pp. 1012-1029, 2020.
  29. F. Rahmani, R. Kamgar, and R. Rahgozar, “Finite Element analysis of functionally graded beams using different beam theories”, Civil Engineering Journal, Vol. 6, No. 11, pp. 2086-2102, 2020.
  30. M. S. A. Houari, A. A. Bousahla, A. Bessaim, E. A. A. Bedia, and A. Tounsi, “Buckling of Functionally Graded Nano beams Based on the Nonlocal New First-Order Shear Deformation Beam Theory”, MATEC Web of Conferences, Vol. 11, 2014.
  31. R. Saljooghi, M. T. Ahmadian, and G. H. Farrahi, “Vibration and buckling analysis of functionally graded beams using reproducing kernel particle method”, Scientia Iranica B, Vol. 21, Issue 6, pp. 1896-1906, 2014.
  32. T. Nguyen, T. T. Nguyen, T. P. Vo, and H. Thai, “Vibration and buckling analysis of functionally graded sandwich beams by anew higher order shear deformation theory”, Composites Part B: Engineering, Vol. 76, pp. 273285, 2015.
  33. M. U. Uysala, and M. Kremzer, “Buckling Behaviour of Short Cylindrical Functionally Gradient Polymeric Materials”, Acta Physica Polonica A, Vol. 127, No. 4, pp. 1355-1357, 2015.
  34. J. Yang, H. Wu, and S. Kitipornchai, “Buckling and postbuckling of functionally graded multilayer graphene platelet-reinforced composite beams”, Composite Structures, Vol. 161, pp. 111-118, 2017. http://dx.doi.org/10.1016/j.compstruct.2016.11.048
  35. M. Z. Nejad, A. Hadi, and A. Rastgoo, “Buckling analysis of arbitrary two-directional functionally graded EulerBernoulli nano-beams based on nonlocal elasticity theory”, International Journal of Engineering Science, Vol. 103, pp. 1-10, 2016. https://doi.org/10.1016/j.ijengsci.2016.03.001
  36. R. A. Neamah, A. A. Nassar, and L. S. Alansari, “Buckling simulation of simply supported FG beam based on different beam theories”, Basrah Journal for Engineering Sciences, Vol. 21, No. 3, pp. 10-24, 2021.
  37. J. Yang, and Y. Chen, “Free vibration and buckling analyses of functionally graded beams with edge cracks”, Composite Structures, Vol. 83, Issue 1, pp. 48-60, 2008.
  38. L. Ke, J. Yang, S. Kitipornchai, and Y. Xiang, “Flexural Vibration and Elastic Buckling of a Cracked Timoshenko Beam Made of Functionally Graded Materials”, Mechanics of Advanced Materials and Structures, Vol. 16, Issue 6, pp. 488-502, 2009.
  39. Ş. D. Akbaş, “Geometrically Nonlinear Static Analysis of Edge Cracked Timoshenko Beams Composed of Functionally Graded Material”, Mathematical Problems in Engineering, Vol. 2013, Article ID 871815, pp. 1-14, 2013.
  40. K. Sherafatnia, G. H. Farrahi, and S. A. Faghidian, “Analytic Approach to Free Vibration and Buckling Analysis of Functionally Graded Beams with Edge Cracks Using Four Engineering Beam Theories”, International Journal of Engineering, Vol. 27, Issue 6, pp. 979-990, 2014. https://www.ije.ir/article_72331.html
  41. H. Khazal, H. Bayesteh, S. Mohammadi, S. S. Ghorashi, and A. A. Nassar, “An extended element free Galerkin method for fracture analysis of functionally graded materials”, Mechanics of Advanced Materials and Structures, Vol. 23, Issue 5, pp. 513-528, 2015.
  42. Ş. D. Akbaş, “Bending of a cracked functionally graded nanobeam”, Advances in Nano Research, Vol. 6, Issue 3, pp. 219-242, 2018.
  43. M. Tam, Z. Yang, S. Zhao, and J. Yang, “Vibration and Buckling Characteristics of Functionally Graded Graphene Nanoplatelets Reinforced Composite Beams with Open Edge Cracks”, Materials, Vol. 12, Issue 9, pp. 1-13, 2019.
  44. H. Khazal, A. F. Hassan, W. Farouq, and H. Bayesteh, “Computation of Fracture Parameters in Stepwise Functionally Graded Materials Using Digital Image Correlation Technique”, ASTM International, Vol. 8, Issue 1, pp. 344-354, 2019.
  45. W. Farouq, H. Khazal, and A. F. Hassan, “Fracture analysis of functionally graded material using digital image correlation technique and extended element-free Galerkin method”, Optics and Lasers in Engineering, Vol. 121, pp. 307-322, 2019.
  46. K. Haider, and A. S. Nathera, “XEFGM for crack propagation analysis of functionally graded materials under mixed-mode and non-proportional loading”, Mechanics of Advanced Materials and Structures, Vol. 26, Issue 11, pp. 975-983, 2019.