Cover
Vol. 21 No. 3 (2021)

Published: October 31, 2021

Pages: 25-33

Original Article

The Effect of Machining Parameters and Drill Point Angle on the Temperature Distribution in AISI 304 Stainless Steel During Dry Drilling Operation

Amjed M. Kadhim 1 Abdulkareem F. Hassan 1 Qais A. Rishack 2
1 Department of Mechanical Engineering, College Engineering, University of Basrah, Basrah, Iraq
2 Department of Material Engineering, College Engineering, University of Basrah, Basrah, Iraq
History
  • Received: July 15, 2021
  • Revised: August 21, 2021
  • Accepted: September 2, 2021
  • Available Online: October 5, 2021
DOI

https://doi.org/10.33971/bjes.21.3.3

Abstract

In this research work, the influence of cutting parameters and drill point angle on the temperature distribution in dry drilling of stainless steel AISI 304 was numerically investigated by using FE method based on DEFORM-3D V.11 commercial software. Two cutting tools of 10 mm diameter but different in point angles, one is 110° and the other is 118°. These tools were imported from specific website in a format of STL and inserted in the program during modeling of cutting tools. The material of the cutting tools is selected as high-speed steel. The workpiece model is created as cylindrical shape with 50 mm diameter and 5 mm thickness. The cutting parameters are selected as three cutting speeds (100, 200, and 300) rpm, with three feed rates (0.15, 0.25, and 0.35) mm/rev. The depth of hole is fixed for all simulations (3 mm). The percentage of increase or decrease in the resulted temperature according to the various cutting parameter was also calculated and discussed. The best cutting performance of tools according to the change of point angles was also investigated. The results provided a significant influence of cutting speed and tool point angle on the temperature generated in the machined models and very small influence of feed speed on the workpiece temperature.

Keywords

References

  1. B. Ozcelik, and E. Bagci, “Experimental and numerical studies on the determination of twist drill temperature in dry drilling: A new approach”, Materials and Design, Vol. 27, Issue 10, pp. 920-927, 2006.
  2. R. P. Zeilmann, and W. L. Weingaertner, “Analysis of temperature during drilling of Ti6Al4V with minimal quantity of lubricant”, Journal of materials processing Technology, Vol. 179, Issue 1-3, pp. 124-127, 2006.
  3. R. Li, and A. J. Shil, “Tool Temperature in Titanium Drilling”, Journal of Manufacture Science and Engineering, Vol. 129, Issue 4, pp. 740-749, 2007.
  4. J. Wu, and R. Han, “An Analytical Evaluation of Drilling Temperature”, Key Engineering Materials, Vol. 407-408, pp. 400-403, 2009.
  5. R. Muhammad, N. Ahmed, Y. M. Shariff, and V. V. Silberschmidt, “Effect of cutting conditions on temperature generated in drilling process: A FEA approach”, Advanced Materials Research, Vol. 223, pp. 240-246, 2011.
  6. X. Gao, H. Li, Q. Liu, P. Zou, and F. Liu, “Simulation of Stainless Steel Drilling Mechanism Based on Deform-3D”, Advanced Materials Research, Vol. 160-162, pp. 16851690, 2011.
  7. B. P. Nedić, and M. D. Erić, “Cutting Temperature Measurement and Material Machinability”, Thermal Science, Vol. 18, Issue 1, pp. 259-268, 2014.
  8. Y. Su, D. D. Chen, and L. Gong, “3D Finite Element Analysis of Drilling of Ti-6Al-4V Alloy”, International Conference on Computer Information Systems and Industrial Applications, 2015.
  9. I. Ucun, and S. Kaplan. “Determination of Tool Wear and Chip Formation in Drilling Process of AISI 1045 Material Using Plasma-Nitrided High-Speed Steel Drill Bits”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 231, No. 10, pp. 1725-1734, 2017.
  10. S. Berkani, M. A. Yallese, L. Boulanouar, and T. Mabrouki, “Statistical analysis of AISI 304 austenitic stainless steel machining using Ti (C, N)/A12O3/TiN CVD coated carbide tool”, International Journal of Industrial Engineering Computations, Vol. 6, pp. 539-552, 2015.
  11. M. P. Kumar, K. Amarnath, and M. S. Kumar, “A Review on Heat Generation in Metal Cutting”, International Journal of Engineering and Management Research, Vol. 5, Issue 4, pp. 193-197, 2015.
  12. J. S. Vas, A. Fernandes, A. DʼSouza, A. Rai, and J. D. Quadros, “Analysis of Temperature Changes During Dry Drilling of Austenitic Stainless Steel on Twist Drills Having Different Point Angles”, Journal of Mechanical Engineering and Automation, Vol. 6, No. 5A, pp. 121-125, 2016. https://doi.org/10.5923/c.jmea.201601.23
  13. O. O. Ajayi, D. A. Lawal, M. Ogbonnaya, and A. Michael, “Experimental Investigation and FE Simulation of the Effect of Variable Control on Temperature Distribution in Orthogonal Metal Cutting Process”, Procedia Manufacturing, Vol. 7, pp. 675-681, 2017.
  14. H. S. Patne, A. Kumar, S. Karagadde, and S. S. Joshi, “Modeling of temperature distribution in drilling of titanium”, International Journal of Mechanical Sciences, Vol. 133, pp. 598-610, 2017.
  15. I. Lazoglu, G. Poulachon, Ch. Ramirez, M. Akmal, B. Marcon, F. Rossi, J. Outeiro, and M. Krebs, “Thermal analysis in Ti-6Al-4V drilling”, CIRP Annals, Vol. 66, Issue 1, pp. 105-108, 2017.
  16. M. S. Nagaraj, Ch. Ezhilarasan, A. J. P. Kumar, and R. Betala, “Analysis of multipoint cutting tool temperature using FEM and CFD”, Manufacturing Review, Vol. 5, No. 16, 2018. https://doi.org/10.1051/mfreview/2018013
  17. N. Uçak, and A. Çiçek, “The effects of cutting conditions on cutting temperature and hole quality in drilling of Inconel 718 using solid carbide drills”, Journal of Manufacturing Processes, Vol. 31, pp. 662-673, 2018.
  18. O. Erkan, and E. Yücel, “Simulation of Drilling Process of AISI 304 Plates Using Deform-3D Software”, 5th International Symposium on Multidisciplinary Studies (ISMS), Ankara, Turkey, 2018.
  19. R. Sharma, and S. Pradhan, “Review on Analysis of Variation of Temperature in Simulation Using Deform3D”, Journal of Emerging Technologies and Innovative Research, Vol. 6, Issue 1, pp. 1749-1755, 2019. http://www.jetir.org/papers/JETIRDY06279.pdf
  20. K. Thirukkumaran, M. Menaka, C. K. Mukhopadhyay, and B. Venkatraman, “A Study on Temperature Rise, Tool Wear, and Surface Roughness during Drilling of Al5%SiC Composite”, Arabian Journal for Science and Engineering, Vol. 45, pp. 5407-5419, 2020.